method

1599Currently online
62Today's Reading
48Share Today
Multilingual display

cad How to make a showcase floor plan

2018-04-05 01:36:57

In front of us, we have understood how to make four-door showcase floor plan in cad software. Today, we will understand how to make showcase floor plan in cad.

Tools/Materials

AutoCAD 2013

Methods/Steps
1

Open AutoCAD 2013 software, click "Layer Manager", click "Layer", and name the layer "Showcase". Click the color block and set a layer color according to the icon to complete the setting of the showcase layer (as shown in the picture);

2

Click [Rectangle Tool], enter d in the command bar according to the icon and press the space bar, enter the length value: 1200 and press the space bar, continue to enter the width value: 2000 and press the space bar to complete the drawing of the rectangular pattern. Select the pattern, click the "decomposition tool" in the right toolbar, and blow up the pattern (as shown in the picture);

3

Click [Offset] in the right toolbar, enter: 25 in the command bar, select the side edge and top edge of the pattern, and offset the side edge and top edge in turn. Enter: 80 in the command bar, select the bottom edge, and offset the bottom edge upward (as shown in the figure);

4

Click [offset] in the toolbar on the right, enter the value in the command bar according to the icon, and select the corresponding offset operation (as shown in the figure);

5

Click [Line Tool] to draw a line, click [Drawing] - [point] - [fixed number equal division], and enter the value: 4 in the command bar to generate line segment quarters. Click [Line tool] to finish drawing part of the pattern of the laminate according to the diagram;

6

Select the line segment shown in the diagram, click [drawing] - [point] - [fixed number equal division], and enter the value: 3 in the command bar to generate the line segment three equal division. After completion, click the "Line Tool" to draw two straight line segments in the illustrated area (as shown in the figure);

7

Import the prepared handle block to the file and adjust the handle position. After the completion of the details of the production, our showcase floor plan will be completed.

Recommendation