method

1103Currently online
10Today's Reading
20Share Today
Multilingual display

How to spray the wheel color change? Detailed installation instructions? Kust

2018-04-15 12:48:03

Product: wheel color change film quantity: one wheel bottle, four bottles are needed Applicable model: Any model applicable characteristics: can be torn by hand, can be changed at any time

Tools/Materials
1

Four bottles of spray film (one bottle per wheel)

2

Towel, watering can, tar (for cleaning cars)

3

Protective film

4

Cardstock or playing cards (protection around tires)

5

Brush (needed for cleaning)

6

Gloves

7

eye

Methods/Steps
1

This information is taken from experience without authorization

2

Next the technicians began to work, first to clean the wheel hub.

3

Then use a protective film to wrap the wheel bone to avoid the ink spray when the wheel hub, difficult to clean.

4

Then a card is placed between the wheel hub and the tire

5

Four bottles of Supreme Black inkjet to be constructed, one for each wheel.

6

Before the construction spraying, the technician should shake the bottle repeatedly for 1-2 minutes and then spray, spray the wheel needs to start spraying from a small area, and the wheel needs to be sprayed several times before the real spray is finished. Among them, the process of spraying should be properly paused, and the effect will be better.

7

After the first spray is finished, stop for a few minutes and then work on the back door several times.

8

After all spraying is completed, wait more than half an hour for the ink to dry completely before taking off the protective film and card.

9

After the final completion of the wheel effect, the supreme black bright as new.

10

Can not see is the effect of spray, do not know that it is to change the wheel hub!

Matters needing attention
1

Before painting, fully shield the surface of surrounding objects that do not need to be painted

2

When jetting, the Angle between the aerosol tank and the level must be kept not less than 45 degrees, such as the remaining small allowance, you can adjust the nozzle to 180 degrees and then spray

3

After the completion of all construction, natural drying for 4-8 hours, two days of internal cleaning is recommended

4

Winter construction if the construction nozzle is not normal. This product can be immersed in warm water of 25 degrees and 35 degrees for about 3-10 minutes before construction

5

If it is not used up once, spray upside down for 3 seconds, remove the residual film of the nozzle, and then store it upright for the next use

6

After spraying the surface of the object to avoid contact with gasoline and diesel, alcohol, diluent and other liquids

7

Please store in an environment below 40 degrees, away from heat and open flame

8

No exposure, puncturing or burning

9

Keep away from children, avoid eye contact and do not ingest

Recommendation