method

1714Currently online
109Today's Reading
27Share Today
Multilingual display

ms adhesive construction guidelines

2018-04-29 09:36:42

MS glue is widely used in toilet side, hand washing tray, kitchen, bathroom and other places of the joint edge caulking use, with a good waterproof, moistureproof mildew, long-term does not change color, here is a brief introduction to MS glue construction process, like DIY owners can do it themselves, very simple.

Tools/Materials
1

Single glue gun

2

ms adhesive

3

Masking paper

4

Chamfer scraper

Methods/Steps
1

First, clean up the gaps with a rag or paper towel.

2

Second, glue a piece of paper on both sides of the slit.

3

Then, after pasting the paper, you must first cut the glue mouth with a knife, and you can directly glue.

4

This article illegal climbing is taken from experience

5

Finally, before the MS glue is fully cured, the paper must be torn off.

Matters needing attention
1

It is best to wear plastic gloves during construction to avoid contact with the skin and cause allergies.

2

Gaps need to be clean and kept dry.

Recommendation